These avancon Roller- Corpus are made of pure Polyamide in a medium gray color. As alternatively they can be made with soft tires of Polyurethane for sensitive applications or for reducing noise. 

Also, we offer these Rollers with soft tires for declining and inclining conveyors as well as for chutes of sorters. 

These avancon Conveyor-Rollers are available with rips inside the bores of 15 mm diameter to provide a firm connection to the rotating spindle (fixed drive), which generally has 3 notches.

Alternatively, these avancon Conveyor-Rollers are made with a round bore, which are loose on the spindle and work like friction drive-rollers.

These rollers are used as well for curves (instead of tapered rollers) in combination to fix drive rollers or in applications, which require low pressure accumulation.

Avancon offers the most secure Conveyor Concept, because all drives and electronic elements are hidden inside the closed frame.

The incomparable design of the closed annodized aluminum frame construction ensures torsional rigidity with its internal ribs, which at the same time allow easy snap-fastening of all elements. This is absolutely safe, no other protection is required (such as finger protection for each roller, etc.).

With the avancon ZPC system, the roller corpus is fixed to the axle-tube with a diameter of 15 mm, whereby this axle-tube is driven. The axle-tube has three notches.

The avancon drive system in the closed frame drives the axes – with the rollers respectively of one zone.

The precision ball bearings, sitting in a housing of polyamide, are used different than usual. The outer Ring stands still in its housing, whereas the inner ring rotates with the spindle, this is the best solution; preventing the balls from running at only one point on the inner ring. That’s why the bearings in the avancon ZPC-Concept last much longer.

You get a high degree of flexibility when using the avancon Roller Corpus Concepts, with or without spacers, in different positions. Depending on the base and form of the boxes you can save a lot of money by choosing the appropriate roller combination.

You can transport both large goods and small ones with a length of only 120 mm at a pitch of 40 mm, without having to change the rollers to a smaller diameter.

For lateral movement from one to the other conveyor line these avancon roller-corpus are ideally suited, because they are highly abrasive and have very high sliding properties. (In contrast to galvanized steel rollers) and very smooth rounding on both sides. (see also the Video: "The avancon picking-Line application")

These avancon conveyor rollers are available for fixed drive and for friction drive, which are used for curves (see Curves)- instead of tapered rollers - and if low-pressure accumulation and in gravity conveyors.

See all the Benefits of the avancon-ZPC-Conveyor system.

This is the complete avancon conveyor roller with the special spindle, which turns. 

All the roller combinations shown above are possible on this spindle. The roller corpus are made of Polyamide, abrasive, gliding and do not wear out. They are easy to be cleaned and keep their color for ever.

Alternatively, these avancon Roller corpus are available of Polyamide with soft tires of Polyurethane 70° shore 

(like belt material), also for up- and down transport-

Nature/Bionics inspired us, when we designed this robust Roller Corpus with rips inside