Zone Powered Conveyor
If you have uniform boxes throughout your logistic center or your production, you can use this avancon ZPC roller conveyor system with 2 rows of single rollers.
These rollers can be delivered with or without tires of softer Polyurethane and run very quiet. Only one line is powered.
The DC -motors for each conveyor- zone will be installed inside the conveyor frames and so they don't disturb anybody.
If you have boxes, and trays, which are slightly different or conical, then you can use the avancon ZPC roller conveyor system with 2 rows of double conveyor-rollers.
These conveyor-roller corpus can be delivered with or without tires of softer Polyurethane and run very quiet.
Only one line is powered.
If you have boxes, and/or trays in different sizes or conical, then you can use the avancon ZPC system with conveyor-roller-corpus and spacers. These conveyor-rollers can be delivered with or without tires of softer Polyurethane and run very quiet.
This avancon roller conveyor-system can be made with a min. pitch of 38 mm. That means you can transport very small goods from 120 mm length without having to use rollers in smaller diameters. These roller-corpus are also available as friction drive with low pressure in accumulation.
For different sizes - as cartons, very small and large mixed - you may use the full width avancon "multiblock" conveyor-rollers made with or without soft tires of Polyurethane.
These conveyor- rollers are also available as friction-drive rollers for low pressure accumulation.
avancon ZPC-Roller Conveyor for all kind of boxes, cartons, tablets, trays, totes and so on for transportation of about 80% of all goods, which have to be transported worldwide with full width conveyor-rollers of steel tube zinc plated or Aluminum anodized.
But also - as shown down here - it is possible as special type -, where goods are unstable or very high, to position them in a lower level for higher guidance.
For 80 % of all units to be handled and
transported worldwide in logistic and distribution centers.